This series is intended for any customer that is deploying our solution or already deployed our Product. It explains very clearly the logic behind the scenes and shows all the commands in CLI and BV. It also refers to our Manuals where applicable.
Part 1– Presentation: Covers what is needed for establishing a Setup from out of the box until Attaching a UE. Approximately 1.5 – 2 hours
o Description of the Compact1000/3000, it’s HW, interfaces and characteristics
o GPS o Pre Configurations Steps o Other mandatory configurations steps (Radio, Networking, RAN, etc.)
o EPC Configuration (Embedded Device) o iHSS and L3 Service Configuration
o UE Network Configuration
Part 2– Walks you through all steps needed to configure a Compact, the EPC and goes through all the steps until the UE is attached. It is done by going on CLI (of both the Compact, the EPC part and the BV) and through BV Screens. Approximately 1.5 – 2 hours
Part 3– Q&A session Approximately 1 – 1.5 hours